Homepage Technical Specifications of Cars Nissan Stanza 1800 SGX Sedan

Nissan - Stanza 1800 SGX Sedan

Technical Specs of This Model
1. Stanza 1800 SGX Sedan
General Information
Make Nissan
Model Stanza 1800 SGX Sedan
Production Year
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2470 mm     (97,2 in)
Front Track 1430 mm     (56,3 in)
Rear Track 1410 mm     (55,5 in)
Length 4300 mm     (169,3 in)
Width 1650 mm     (65 in)
Height 1405 mm     (55,3 in)
Ground Clearance 170 mm     (6,7 in)
Length / Wheelbase Ratio 1,74
Weight 940 kg     (2070,5 lb)
Weight Distribution (front/rear)
Fuel Capacity 54 litre   (11,9 Imp gal ,  14,3 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Nissan
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1809 cc     (110,39 cu in)
Bore 83 mm     (3,27 in)
Stroke 83,6 mm     (3,29 in)
Bore / Stroke Ratio 0,99
Unitary Capacity 452,25 cc/cylinder    (27,6 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 8,8 : 1
Fuel System Type 1 Hi carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 100 HP     (74,6 kW)
Maximum Engine Power rpm 5600 d/d
Maximum Engine Torque 149 N.m     (110 lb.ft ,  15,2 kg.m)
Maximum Engine Torque rpm 2800 d/d
Engine Torque at Max. Engine Power rpm 127,2 N.m    (5600 d/d)
Power / Weight Ratio 106,4 HP/ton    (79,3 W/kg)
Power / Engine Displacement Ratio 55,3 HP/litre    (41,2 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 165 km/h   (102,5 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 0,9 : 1
Final Drive Ratio 3,65 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock) 2,8
Turning Circle Diameter 10,8 m    (35,4 ft)
Suspension (front) I.MS.LW.CS.
Suspension (rear) I.MS.RA.CS.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)