Homepage Technical Specifications of Cars Toyota Cressida 1.8 DX

1980 - Toyota - Cressida 1.8 DX

Technical Specs of This Model
1. Cressida 1.8 DX 1980
General Information
Make Toyota
Model Cressida 1.8 DX
Production Year 1980
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2645 mm     (104,1 in)
Front Track 1375 mm     (54,1 in)
Rear Track 1350 mm     (53,1 in)
Length 4500 mm     (177,2 in)
Width 1670 mm     (65,7 in)
Height 1445 mm     (56,9 in)
Ground Clearance 175 mm     (6,9 in)
Length / Wheelbase Ratio 1,7
Weight 1044 kg     (2299,6 lb)
Weight Distribution (front/rear)
Fuel Capacity 65 litre   (14,3 Imp gal ,  17,2 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Toyota
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1770 cc     (108,01 cu in)
Bore 85 mm     (3,35 in)
Stroke 78 mm     (3,07 in)
Bore / Stroke Ratio 1,09
Unitary Capacity 442,5 cc/cylinder    (27 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 9 : 1
Fuel System Type 1 Ai carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 85 HP     (63,4 kW)
Maximum Engine Power rpm 5400 d/d
Maximum Engine Torque 139 N.m     (102,6 lb.ft ,  14,2 kg.m)
Maximum Engine Torque rpm 3400 d/d
Engine Torque at Max. Engine Power rpm 112,1 N.m    (5400 d/d)
Power / Weight Ratio 81,4 HP/ton    (60,7 W/kg)
Power / Engine Displacement Ratio 48 HP/litre    (35,8 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 9,1 s
0 - 60 mph 13,8 s
0 - 100 km/h 14,7 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration 36,4 s
Top Speed 152 km/h   (94,5 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 3,89 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.MS.
Suspension (rear) LA.CS.TrLi.PR.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)