Homepage Technical Specifications of Cars Fiat Multipla JTD 105 SX

1998 - Fiat - Multipla JTD 105 SX

Technical Specs of This Model
1. Multipla JTD 105 SX 1998
General Information
Make Fiat
Model Multipla JTD 105 SX
Production Year 1998
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 5/6S MPV
Number of Doors 5
Wheelbase 2666 mm     (105 in)
Front Track 1511 mm     (59,5 in)
Rear Track 1520 mm     (59,8 in)
Length 3994 mm     (157,2 in)
Width 1871 mm     (73,7 in)
Height 1670 mm     (65,7 in)
Ground Clearance
Length / Wheelbase Ratio 1,5
Weight 1370 kg     (3017,6 lb)
Weight Distribution (front/rear)
Fuel Capacity 63 litre   (13,9 Imp gal ,  16,6 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Fiat
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1910 cc     (116,56 cu in)
Bore 82 mm     (3,23 in)
Stroke 90,4 mm     (3,56 in)
Bore / Stroke Ratio 0,91
Unitary Capacity 477,5 cc/cylinder    (29,14 cu in/cylinder)
Number of Main Bearings
Compression Ratio 18,45 : 1
Fuel System Type Bo EDC15 direct diesel inj.
Aspiration Type Turbo D.
Compressor Type
Intercooler Type Yes
Catalytic Converter Yes
Maximum Engine Power 105 HP     (78,3 kW)
Maximum Engine Power rpm 4000 d/d
Maximum Engine Torque 200 N.m     (147,6 lb.ft ,  20,4 kg.m)
Maximum Engine Torque rpm 1500 d/d
Engine Torque at Max. Engine Power rpm 186,9 N.m    (4000 d/d)
Power / Weight Ratio 76,6 HP/ton    (57,2 W/kg)
Power / Engine Displacement Ratio 55 HP/litre    (41 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h 12,3 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration 34,2 s
Top Speed 170 km/h   (105,7 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,82 : 1
Final Drive Ratio 3,35 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock)
Turning Circle Diameter 11 m    (36,1 ft)
Suspension (front) I.MS.LW.CS.ARB.
Suspension (rear) I.CS.ARB.
Brakes (front/rear) VeDi/Di
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)