Homepage Technical Specifications of Cars Toyota Ipsum 240i Limited 4WD

2002 - Toyota - Ipsum 240i Limited 4WD

Technical Specs of This Model
1. Ipsum 240i Limited 4WD 2002
General Information
Make Toyota
Model Ipsum 240i Limited 4WD
Production Year 2002
Country
Designer
Production Number
Model Code TA-ACM26W-ARSEK
Model Family
Chassis and Dimensions
Chassis Type 6/7S MPV
Number of Doors 5
Wheelbase 2825 mm     (111,2 in)
Front Track 1505 mm     (59,3 in)
Rear Track 1500 mm     (59,1 in)
Length 4650 mm     (183,1 in)
Width 1760 mm     (69,3 in)
Height 1680 mm     (66,1 in)
Ground Clearance 150 mm     (5,9 in)
Length / Wheelbase Ratio 1,65
Weight 1570 kg     (3458,1 lb)
Weight Distribution (front/rear)
Fuel Capacity 60 litre   (13,2 Imp gal ,  15,9 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Toyota
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 4    (Total of 16 Pieces)
Engine Displacement 2362 cc     (144,14 cu in)
Bore 88,5 mm     (3,48 in)
Stroke 96 mm     (3,78 in)
Bore / Stroke Ratio 0,92
Unitary Capacity 590,5 cc/cylinder    (36,03 cu in/cylinder)
Number of Main Bearings
Compression Ratio 9,6 : 1
Fuel System Type EFi
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 158 HP     (117,8 kW)
Maximum Engine Power rpm 5600 d/d
Maximum Engine Torque 221 N.m     (163,1 lb.ft ,  22,5 kg.m)
Maximum Engine Torque rpm 4000 d/d
Engine Torque at Max. Engine Power rpm 200,9 N.m    (5600 d/d)
Power / Weight Ratio 100,6 HP/ton    (75 W/kg)
Power / Engine Displacement Ratio 66,9 HP/litre    (49,9 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 4A
Top Gear Ratio
Final Drive Ratio
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion
Steering Turns (lock to lock)
Turning Circle Diameter 11 m    (36,1 ft)
Suspension (front) I.Struts.CS.
Suspension (rear) I.TB.CS.
Brakes (front/rear) VeDi/Di-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)