2000 - Volkswagen - Lupo 1.2 TDi

Technical Specs of This Model
1. Lupo 1.2 TDi 2000
General Information
Make Volkswagen
Model Lupo 1.2 TDi
Production Year 2000
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S HBK
Number of Doors 3
Wheelbase 2319 mm     (91,3 in)
Front Track 1419 mm     (55,9 in)
Rear Track 1394 mm     (54,9 in)
Length 3529 mm     (138,9 in)
Width 1621 mm     (63,8 in)
Height 1464 mm     (57,6 in)
Ground Clearance
Length / Wheelbase Ratio 1,52
Weight 854 kg     (1881,1 lb)
Weight Distribution (front/rear)
Fuel Capacity 34 litre   (7,5 Imp gal ,  9 US gal)
Aerodynamics
Drag Coefficient 0,29
Frontal Area 2
Cx 0,58
Engine Specifications
Engine Manufacturer Volkswagen
Engine Location Front
Engine Alignment Transverse
Engine Construction cast iron block & aluminium head
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-3
Valves per Cylinder 2    (Total of 6 Pieces)
Engine Displacement 1191 cc     (72,68 cu in)
Bore 76,5 mm     (3,01 in)
Stroke 86,4 mm     (3,4 in)
Bore / Stroke Ratio 0,89
Unitary Capacity 397 cc/cylinder    (24,23 cu in/cylinder)
Number of Main Bearings 4
Compression Ratio 19,5 : 1
Fuel System Type Direct diesel inj.
Aspiration Type Turbo D.
Compressor Type
Intercooler Type
Catalytic Converter Yes
Maximum Engine Power 60 HP     (44,7 kW)
Maximum Engine Power rpm 4000 d/d
Maximum Engine Torque 140 N.m     (103,3 lb.ft ,  14,3 kg.m)
Maximum Engine Torque rpm 2400 d/d
Engine Torque at Max. Engine Power rpm 106,8 N.m    (4000 d/d)
Power / Weight Ratio 70,3 HP/ton    (52,4 W/kg)
Power / Engine Displacement Ratio 50,4 HP/litre    (37,6 kW/litre)
CO2 Emissions 81 g/km
Fuel Consumption 3.6/2.7/3.0 l/100km urban/extra-urban/combined
Performance
0 - 80 km/h 10,6 s
0 - 60 mph
0 - 100 km/h 14,7 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 20 s
0 - 1000 m Acceleration 36,5 s
Top Speed 165 km/h   (102,5 mph)
Gearbox and Transmission
Transmission Type 5SA
Top Gear Ratio 0,64 : 1
Final Drive Ratio 3,33 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock)
Turning Circle Diameter 10,4 m    (34,1 ft)
Suspension (front) I.MS.CS.ARB.
Suspension (rear) I.TB.TA.CS.
Brakes (front/rear) VeDi/Dr-S-ABS
Brake Disc Diameter (front) 239 mm
Brake Disc Diameter (rear) 180 mm
Wheels (front) 4.5J x 14
Wheels (rear) 4.5J x 14
Tyres (front) 155/65 R 14 S
Tyres (rear) 155/65 R 14 S