Homepage Technical Specifications of Cars Daihatsu Consorte Coupe TL

1977 - Daihatsu - Consorte Coupe TL

Technical Specs of This Model
1. Consorte Coupe TL 1977
General Information
Make Daihatsu
Model Consorte Coupe TL
Production Year 1977
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors 2
Wheelbase 2260 mm     (89 in)
Front Track 1260 mm     (49,6 in)
Rear Track 1240 mm     (48,8 in)
Length 3790 mm     (149,2 in)
Width 1530 mm     (60,2 in)
Height 1320 mm     (52 in)
Ground Clearance 170 mm     (6,7 in)
Length / Wheelbase Ratio 1,68
Weight 745 kg     (1641 lb)
Weight Distribution (front/rear) %46 / %54
Fuel Capacity 38 litre   (8,4 Imp gal ,  10 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Daihatsu
Engine Location Front
Engine Alignment Longitudinal
Engine Construction cast iron block & light alloy head
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 958 cc     (58,46 cu in)
Bore 68 mm     (2,68 in)
Stroke 66 mm     (2,6 in)
Bore / Stroke Ratio 1,03
Unitary Capacity 239,5 cc/cylinder    (14,62 cu in/cylinder)
Number of Main Bearings 3
Compression Ratio 9 : 1
Fuel System Type 1 FE-10 Stromberg carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 52 HP     (38,8 kW)
Maximum Engine Power rpm 5500 d/d
Maximum Engine Torque 76 N.m     (56,1 lb.ft ,  7,8 kg.m)
Maximum Engine Torque rpm 3800 d/d
Engine Torque at Max. Engine Power rpm 67,3 N.m    (5500 d/d)
Power / Weight Ratio 69,8 HP/ton    (52 W/kg)
Power / Engine Displacement Ratio 54,3 HP/litre    (40,5 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 4,3 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball
Steering Turns (lock to lock) 3,3
Turning Circle Diameter
Suspension (front) I.MS.CS.LW.ARB.
Suspension (rear) LA.SE.
Brakes (front/rear) Dr/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front) 4 x 12
Wheels (rear) 4 x 12
Tyres (front) 6.00 x 12
Tyres (rear) 6.00 x 12