Homepage Technical Specifications of Cars Toyota Crown Royal 3.0 4WD

2003 - Toyota - Crown Royal 3.0 4WD

Technical Specs of This Model
1. Crown Royal 3.0 4WD 2003
General Information
Make Toyota
Model Crown Royal 3.0 4WD
Production Year 2003
Country
Designer
Production Number
Model Code CBA-GRS180-AEAQH
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2850 mm     (112,2 in)
Front Track 1525 mm     (60 in)
Rear Track 1520 mm     (59,8 in)
Length 4840 mm     (190,6 in)
Width 1780 mm     (70,1 in)
Height 1485 mm     (58,5 in)
Ground Clearance 150 mm     (5,9 in)
Length / Wheelbase Ratio 1,7
Weight 1640 kg     (3612,3 lb)
Weight Distribution (front/rear)
Fuel Capacity 71 litre   (15,6 Imp gal ,  18,8 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Toyota
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement V-6
Valves per Cylinder 4    (Total of 24 Pieces)
Engine Displacement 2994 cc     (182,71 cu in)
Bore 87,5 mm     (3,44 in)
Stroke 83 mm     (3,27 in)
Bore / Stroke Ratio 1,05
Unitary Capacity 499 cc/cylinder    (30,45 cu in/cylinder)
Number of Main Bearings
Compression Ratio 11,5 : 1
Fuel System Type direct petrol injection
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 252 HP     (187,9 kW)
Maximum Engine Power rpm 6200 d/d
Maximum Engine Torque 314 N.m     (231,7 lb.ft ,  32 kg.m)
Maximum Engine Torque rpm 3600 d/d
Engine Torque at Max. Engine Power rpm 289,4 N.m    (6200 d/d)
Power / Weight Ratio 153,7 HP/ton    (114,6 W/kg)
Power / Engine Displacement Ratio 84,2 HP/litre    (62,8 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 6A
Top Gear Ratio 0,59 : 1
Final Drive Ratio 4,1 : 1
Drive Wheels AWD (All Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.DW.CS.
Suspension (rear) I.MultiLi.CS.
Brakes (front/rear) VeDi/Di-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)