1975 - Ferrari - 208 GT/4

Technical Specs of This Model
1. 208 GT/4 1975
2. 208 GT/4 1979
General Information
Make Ferrari
Model 208 GT/4
Production Year 1975
Country
Designer Bertone
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors 2
Wheelbase 2550 mm     (100,4 in)
Front Track 1470 mm     (57,9 in)
Rear Track 1460 mm     (57,5 in)
Length 4300 mm     (169,3 in)
Width 1740 mm     (68,5 in)
Height 1180 mm     (46,5 in)
Ground Clearance 120 mm     (4,7 in)
Length / Wheelbase Ratio 1,69
Weight 1150 kg     (2533 lb)
Weight Distribution (front/rear)
Fuel Capacity 80 litre   (17,6 Imp gal ,  21,1 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Ferrari
Engine Location Middle
Engine Alignment Transverse
Engine Construction light alloy block & head
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement V-8
Valves per Cylinder 2    (Total of 16 Pieces)
Engine Displacement 1991 cc     (121,5 cu in)
Bore 66,8 mm     (2,63 in)
Stroke 71 mm     (2,8 in)
Bore / Stroke Ratio 0,94
Unitary Capacity 248,88 cc/cylinder    (15,19 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 9 : 1
Fuel System Type 4 We 34 DCNF carbs
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 167 HP     (124,5 kW)
Maximum Engine Power rpm 7700 d/d
Maximum Engine Torque 186 N.m     (137,3 lb.ft ,  19 kg.m)
Maximum Engine Torque rpm 4900 d/d
Engine Torque at Max. Engine Power rpm 154,4 N.m    (7700 d/d)
Power / Weight Ratio 145,2 HP/ton    (108,3 W/kg)
Power / Engine Displacement Ratio 83,9 HP/litre    (62,5 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 16 s
0 - 1000 m Acceleration 29,5 s    @ 180 km/h    (112 mph)
Top Speed 217 km/h   (134,9 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,88 : 1
Final Drive Ratio 3,71 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion
Steering Turns (lock to lock)
Turning Circle Diameter 12,5 m    (41 ft)
Suspension (front) I.DW.CS.
Suspension (rear) I.DW.CS.
Brakes (front/rear) VeDi/VeDi-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front) 6.5 x 14
Wheels (rear) 6.5 x 14
Tyres (front) 195/70 VR 14
Tyres (rear) 195/70 VR 14