1975 - Mercedes-Benz - 450 SEL 6.9

Technical Specs of This Model
1. 450 SEL 6.9 1975
General Information
Make Mercedes-Benz
Model 450 SEL 6.9
Production Year 1975
Country
Designer
Production Number 7380
Model Code V 116 E 69 / 116.036
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2960 mm     (116,5 in)
Front Track 1520 mm     (59,8 in)
Rear Track 1500 mm     (59,1 in)
Length 5060 mm     (199,2 in)
Width 1870 mm     (73,6 in)
Height 1410 mm     (55,5 in)
Ground Clearance
Length / Wheelbase Ratio 1,71
Weight 1935 kg     (4262,1 lb)
Weight Distribution (front/rear)
Fuel Capacity 96 litre   (21,1 Imp gal ,  25,4 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Mercedes-Benz
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement V-8
Valves per Cylinder 2    (Total of 16 Pieces)
Engine Displacement 6834 cc     (417,04 cu in)
Bore 107 mm     (4,21 in)
Stroke 95 mm     (3,74 in)
Bore / Stroke Ratio 1,13
Unitary Capacity 854,25 cc/cylinder    (52,13 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 8,8 : 1
Fuel System Type Bo K-Jet fuel inj.
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 282 HP     (210,3 kW)
Maximum Engine Power rpm 4000 d/d
Maximum Engine Torque 550 N.m     (405,9 lb.ft ,  56,1 kg.m)
Maximum Engine Torque rpm 2800 d/d
Engine Torque at Max. Engine Power rpm 502 N.m    (4000 d/d)
Power / Weight Ratio 145,7 HP/ton    (108,7 W/kg)
Power / Engine Displacement Ratio 41,3 HP/litre    (30,8 kW/litre)
CO2 Emissions
Fuel Consumption 16.0 l / 100km DIN 70030 (at 3/4 of top speed - not more than 110 km/h - plus 10%)
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h 7,4 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 225 km/h   (139,8 mph)
Gearbox and Transmission
Transmission Type 3A
Top Gear Ratio 1 : 1
Final Drive Ratio 2,65 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball PAS
Steering Turns (lock to lock) 2,7
Turning Circle Diameter 12,1 m    (39,7 ft)
Suspension (front) I.W.CS.
Suspension (rear) I.STA.CS.
Brakes (front/rear) VeDi/Di-S
Brake Disc Diameter (front) 278 mm
Brake Disc Diameter (rear) 279 mm
Wheels (front) 6.5J x 14 H 2
Wheels (rear) 6.5J x 14 H 2
Tyres (front) 215/70 VR 14
Tyres (rear) 215/70 VR 14