1978 - Mercedes-Benz - 240 D

Technical Specs of This Model
1. 240 D 1975
2. 240 D 1973
3. 240 D 1978
General Information
Make Mercedes-Benz
Model 240 D
Production Year 1978
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2795 mm     (110 in)
Front Track 1488 mm     (58,6 in)
Rear Track 1445 mm     (56,9 in)
Length 4725 mm     (186 in)
Width 1786 mm     (70,3 in)
Height 1440 mm     (56,7 in)
Ground Clearance
Length / Wheelbase Ratio 1,69
Weight 1385 kg     (3050,7 lb)
Weight Distribution (front/rear)
Fuel Capacity 65 litre   (14,3 Imp gal ,  17,2 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Mercedes-Benz
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 2399 cc     (146,4 cu in)
Bore 90,9 mm     (3,58 in)
Stroke 92,4 mm     (3,64 in)
Bore / Stroke Ratio 0,98
Unitary Capacity 599,75 cc/cylinder    (36,6 cu in/cylinder)
Number of Main Bearings
Compression Ratio 21 : 1
Fuel System Type Bo diesel inj.
Aspiration Type Normal D.
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 72 HP     (53,7 kW)
Maximum Engine Power rpm 4400 d/d
Maximum Engine Torque 137 N.m     (101,1 lb.ft ,  14 kg.m)
Maximum Engine Torque rpm 2400 d/d
Engine Torque at Max. Engine Power rpm 116,5 N.m    (4400 d/d)
Power / Weight Ratio 52 HP/ton    (38,8 W/kg)
Power / Engine Displacement Ratio 30 HP/litre    (22,4 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 3,69 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.W.CS.
Suspension (rear) I.STA.CS.
Brakes (front/rear) Di/Di
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)