1985 - Mercedes-Benz - 500 SEC

Technical Specs of This Model
1. 500 SEC 1984
2. 500 SEC 1985
3. 500 SEC 1992
General Information
Make Mercedes-Benz
Model 500 SEC
Production Year 1985
Country
Designer
Production Number
Model Code
Model Family C
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors 2
Wheelbase 2850 mm     (112,2 in)
Front Track 1545 mm     (60,8 in)
Rear Track 1517 mm     (59,7 in)
Length 4910 mm     (193,3 in)
Width 1828 mm     (72 in)
Height 1406 mm     (55,4 in)
Ground Clearance
Length / Wheelbase Ratio 1,72
Weight 1610 kg     (3546,3 lb)
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient 0,34
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Mercedes-Benz
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement V-8
Valves per Cylinder 2    (Total of 16 Pieces)
Engine Displacement 4973 cc     (303,47 cu in)
Bore 96,5 mm     (3,8 in)
Stroke 85 mm     (3,35 in)
Bore / Stroke Ratio 1,14
Unitary Capacity 621,62 cc/cylinder    (37,93 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 10 : 1
Fuel System Type Bo K-Jet fuel inj.
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 242 HP     (180,5 kW)
Maximum Engine Power rpm 4750 d/d
Maximum Engine Torque 399 N.m     (294,5 lb.ft ,  40,7 kg.m)
Maximum Engine Torque rpm 2750 d/d
Engine Torque at Max. Engine Power rpm 362,8 N.m    (4750 d/d)
Power / Weight Ratio 150,3 HP/ton    (112,1 W/kg)
Power / Engine Displacement Ratio 48,7 HP/litre    (36,3 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph 7,8 s
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 230 km/h   (142,9 mph)
Gearbox and Transmission
Transmission Type 4A
Top Gear Ratio 1 : 1
Final Drive Ratio 2,24 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.W.CS.
Suspension (rear) I.STA.CS.
Brakes (front/rear)
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)