Homepage Technical Specifications of Cars Opel Kadett Rallye Coupe

1972 - Opel - Kadett Rallye Coupe

Technical Specs of This Model
1. Kadett Rallye Coupe 1972
General Information
Make Opel
Model Kadett Rallye Coupe
Production Year 1972
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors 2
Wheelbase 2416 mm     (95,1 in)
Front Track 1254 mm     (49,4 in)
Rear Track 1278 mm     (50,3 in)
Length 4182 mm     (164,6 in)
Width 1573 mm     (61,9 in)
Height 1405 mm     (55,3 in)
Ground Clearance 113 mm     (4,4 in)
Length / Wheelbase Ratio 1,73
Weight 800 kg     (1762,1 lb)
Weight Distribution (front/rear)
Fuel Capacity 40 litre   (8,8 Imp gal ,  10,6 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Opel
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1196 cc     (72,98 cu in)
Bore 79 mm     (3,11 in)
Stroke 61 mm     (2,4 in)
Bore / Stroke Ratio 1,3
Unitary Capacity 299 cc/cylinder    (18,25 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 9 : 1
Fuel System Type 2 So carbs
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 60 HP     (44,7 kW)
Maximum Engine Power rpm 5400 d/d
Maximum Engine Torque 88 N.m     (64,9 lb.ft ,  9 kg.m)
Maximum Engine Torque rpm 3000 d/d
Engine Torque at Max. Engine Power rpm 79,1 N.m    (5400 d/d)
Power / Weight Ratio 75 HP/ton    (55,9 W/kg)
Power / Engine Displacement Ratio 50,2 HP/litre    (37,4 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 10,5 s
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 143 km/h   (88,9 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 4,11 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball
Steering Turns (lock to lock) 3
Turning Circle Diameter 10,6 m    (34,8 ft)
Suspension (front) I.W.SE.ARB.
Suspension (rear) RA.RA.CS.ARB.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)