Homepage Technical Specifications of Cars Fiat Punto 1.9 JTD ELX

1999 - Fiat - Punto 1.9 JTD ELX

Technical Specs of This Model
1. Punto 1.9 JTD ELX 1999
General Information
Make Fiat
Model Punto 1.9 JTD ELX
Production Year 1999
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S HBK
Number of Doors 3
Wheelbase 2460 mm     (96,9 in)
Front Track 1402 mm     (55,2 in)
Rear Track 1395 mm     (54,9 in)
Length 3800 mm     (149,6 in)
Width 1660 mm     (65,4 in)
Height 1480 mm     (58,3 in)
Ground Clearance
Length / Wheelbase Ratio 1,54
Weight 1040 kg     (2290,7 lb)
Weight Distribution (front/rear)
Fuel Capacity 49 litre   (10,8 Imp gal ,  12,9 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Fiat
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1910 cc     (116,56 cu in)
Bore 82 mm     (3,23 in)
Stroke 90,4 mm     (3,56 in)
Bore / Stroke Ratio 0,91
Unitary Capacity 477,5 cc/cylinder    (29,14 cu in/cylinder)
Number of Main Bearings
Compression Ratio 18,45 : 1
Fuel System Type UNIJET direct diesel inj.
Aspiration Type Turbo D.
Compressor Type
Intercooler Type Yes
Catalytic Converter Yes
Maximum Engine Power 80 HP     (59,7 kW)
Maximum Engine Power rpm 3000 d/d
Maximum Engine Torque 196 N.m     (144,6 lb.ft ,  20 kg.m)
Maximum Engine Torque rpm 1500 d/d
Engine Torque at Max. Engine Power rpm 189,9 N.m    (3000 d/d)
Power / Weight Ratio 76,9 HP/ton    (57,4 W/kg)
Power / Engine Displacement Ratio 41,9 HP/litre    (31,2 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h 12,2 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration 34,2 s
Top Speed 170 km/h   (105,7 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,77 : 1
Final Drive Ratio 2,85 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock)
Turning Circle Diameter 10,5 m    (34,5 ft)
Suspension (front) I.MS.W.CS.ARB.
Suspension (rear) TB.
Brakes (front/rear) Di/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)