Homepage Technical Specifications of Cars Honda 1300 Coupe 7 De Luxe

1970 - Honda - 1300 Coupe 7 De Luxe

Technical Specs of This Model
1. 1300 Coupe 7 De Luxe 1970
General Information
Make Honda
Model 1300 Coupe 7 De Luxe
Production Year 1970
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors 2
Wheelbase 2250 mm     (88,6 in)
Front Track 1245 mm     (49 in)
Rear Track 1195 mm     (47 in)
Length 4140 mm     (163 in)
Width 1495 mm     (58,9 in)
Height 1320 mm     (52 in)
Ground Clearance 175 mm     (6,9 in)
Length / Wheelbase Ratio 1,84
Weight 895 kg     (1971,4 lb)
Weight Distribution (front/rear) %63 / %37
Fuel Capacity 45 litre   (9,9 Imp gal ,  11,9 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Honda
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Air
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1299 cc     (79,27 cu in)
Bore 74 mm     (2,91 in)
Stroke 75,5 mm     (2,97 in)
Bore / Stroke Ratio 0,98
Unitary Capacity 324,75 cc/cylinder    (19,82 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 9 : 1
Fuel System Type 1 Keihin CV carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 94 HP     (70,1 kW)
Maximum Engine Power rpm 7000 d/d
Maximum Engine Torque 103 N.m     (76 lb.ft ,  10,5 kg.m)
Maximum Engine Torque rpm 4000 d/d
Engine Torque at Max. Engine Power rpm 95,6 N.m    (7000 d/d)
Power / Weight Ratio 105 HP/ton    (78,3 W/kg)
Power / Engine Displacement Ratio 72,4 HP/litre    (54 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 175 km/h   (108,8 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 3,5 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion
Steering Turns (lock to lock) 3,8
Turning Circle Diameter
Suspension (front) I.MS.CS.LW.
Suspension (rear) I.SwAx.SE.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front) 6.20S x 13
Tyres (rear) 6.20S x 13