Homepage Technical Specifications of Cars Lancia Kappa 2.0 Turbo

1994 - Lancia - Kappa 2.0 Turbo

Technical Specs of This Model
1. Kappa 2.0 Turbo 1994
General Information
Make Lancia
Model Kappa 2.0 Turbo
Production Year 1994
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2700 mm     (106,3 in)
Front Track 1546 mm     (60,9 in)
Rear Track 1527 mm     (60,1 in)
Length 4687 mm     (184,5 in)
Width 1862 mm     (73,3 in)
Height 1462 mm     (57,6 in)
Ground Clearance
Length / Wheelbase Ratio 1,74
Weight 1480 kg     (3259,9 lb)
Weight Distribution (front/rear)
Fuel Capacity 70 litre   (15,4 Imp gal ,  18,5 US gal)
Aerodynamics
Drag Coefficient 0,31
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Fiat
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 4    (Total of 16 Pieces)
Engine Displacement 1995 cc     (121,74 cu in)
Bore 84 mm     (3,31 in)
Stroke 90 mm     (3,54 in)
Bore / Stroke Ratio 0,93
Unitary Capacity 498,75 cc/cylinder    (30,44 cu in/cylinder)
Number of Main Bearings
Compression Ratio 8,5 : 1
Fuel System Type Bo Motronic M2.7 fuel inj.
Aspiration Type Turbo
Compressor Type 1 Garrett T25 turbo
Intercooler Type Yes
Catalytic Converter Yes
Maximum Engine Power 205 HP     (152,9 kW)
Maximum Engine Power rpm 5600 d/d
Maximum Engine Torque 298 N.m     (219,9 lb.ft ,  30,4 kg.m)
Maximum Engine Torque rpm 2750 d/d
Engine Torque at Max. Engine Power rpm 260,7 N.m    (5600 d/d)
Power / Weight Ratio 138,5 HP/ton    (103,3 W/kg)
Power / Engine Displacement Ratio 102,8 HP/litre    (76,6 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h 7,3 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration 28 s
Top Speed 235 km/h   (146,1 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio
Final Drive Ratio
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock)
Turning Circle Diameter 10,9 m    (35,8 ft)
Suspension (front) I.MS.CS.LW.ARB.
Suspension (rear) I.MR.CS.ReArms.ARB.
Brakes (front/rear) VeDi/Di-S-ABS
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)