Homepage Technical Specifications of Cars Lancia Kappa 2.0 Turbo Diesel

1994 - Lancia - Kappa 2.0 Turbo Diesel

Technical Specs of This Model
1. Kappa 2.0 Turbo Diesel 1994
General Information
Make Lancia
Model Kappa 2.0 Turbo Diesel
Production Year 1994
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2700 mm     (106,3 in)
Front Track 1546 mm     (60,9 in)
Rear Track 1527 mm     (60,1 in)
Length 4687 mm     (184,5 in)
Width 1862 mm     (73,3 in)
Height 1462 mm     (57,6 in)
Ground Clearance
Length / Wheelbase Ratio 1,74
Weight 1485 kg     (3270,9 lb)
Weight Distribution (front/rear)
Fuel Capacity 70 litre   (15,4 Imp gal ,  18,5 US gal)
Aerodynamics
Drag Coefficient 0,31
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Lancia
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement S-5
Valves per Cylinder 4    (Total of 20 Pieces)
Engine Displacement 2387 cc     (145,66 cu in)
Bore 82 mm     (3,23 in)
Stroke 90,4 mm     (3,56 in)
Bore / Stroke Ratio 0,91
Unitary Capacity 477,4 cc/cylinder    (29,13 cu in/cylinder)
Number of Main Bearings
Compression Ratio 21 : 1
Fuel System Type
Aspiration Type Turbo D.
Compressor Type 1 IHI turbo
Intercooler Type Yes
Catalytic Converter Yes
Maximum Engine Power 124 HP     (92,5 kW)
Maximum Engine Power rpm 4250 d/d
Maximum Engine Torque 250 N.m     (184,5 lb.ft ,  25,5 kg.m)
Maximum Engine Torque rpm 2250 d/d
Engine Torque at Max. Engine Power rpm 207,8 N.m    (4250 d/d)
Power / Weight Ratio 83,5 HP/ton    (62,3 W/kg)
Power / Engine Displacement Ratio 51,9 HP/litre    (38,7 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h 11,5 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration 33 s
Top Speed 193 km/h   (120 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio
Final Drive Ratio
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion
Steering Turns (lock to lock)
Turning Circle Diameter 10,9 m    (35,8 ft)
Suspension (front) I.MS.CS.LW.ARB.
Suspension (rear) I.MR.CS.ReArms.ARB.
Brakes (front/rear) VeDi/Di-S-ABS
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)