1990 - Lancia - Dedra 2.0ie

Technical Specs of This Model
1. Dedra 2.0ie 1990
2. Dedra 2.0ie 1990
General Information
Make Lancia
Model Dedra 2.0ie
Production Year 1990
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2540 mm     (100 in)
Front Track 1435 mm     (56,5 in)
Rear Track 1415 mm     (55,7 in)
Length 4340 mm     (170,9 in)
Width 1702 mm     (67 in)
Height 1422 mm     (56 in)
Ground Clearance 150 mm     (5,9 in)
Length / Wheelbase Ratio 1,71
Weight 1210 kg     (2665,2 lb)
Weight Distribution (front/rear)
Fuel Capacity 63 litre   (13,9 Imp gal ,  16,6 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Fiat
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1995 cc     (121,74 cu in)
Bore 84 mm     (3,31 in)
Stroke 90 mm     (3,54 in)
Bore / Stroke Ratio 0,93
Unitary Capacity 498,75 cc/cylinder    (30,44 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 9,5 : 1
Fuel System Type IAW-We fuel inj.
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 111 HP     (82,8 kW)
Maximum Engine Power rpm 5750 d/d
Maximum Engine Torque 156 N.m     (115,1 lb.ft ,  15,9 kg.m)
Maximum Engine Torque rpm 3300 d/d
Engine Torque at Max. Engine Power rpm 137,5 N.m    (5750 d/d)
Power / Weight Ratio 91,7 HP/ton    (68,4 W/kg)
Power / Engine Displacement Ratio 55,6 HP/litre    (41,5 kW/litre)
CO2 Emissions
Fuel Consumption 6.8/8.4/11.4 l/100km 90km/h / 120km/h / urban
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h 10,8 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration 31,4 s
Top Speed 195 km/h   (121,2 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,88 : 1
Final Drive Ratio 3,56 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock)
Turning Circle Diameter 11,4 m    (37,4 ft)
Suspension (front) I.MS.ARB.
Suspension (rear) I.STA.CS.ARB.
Brakes (front/rear) VeDi/Di-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front) 5.5J x 14
Wheels (rear) 5.5J x 14
Tyres (front) 185/60 R 14 82H
Tyres (rear) 185/60 R 14 82H