1908 - Thames - 80

Technical Specs of This Model
1. 80 1908
General Information
Make Thames
Model 80
Production Year 1908
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type
Number of Doors
Wheelbase 3962 mm     (156 in)
Front Track
Rear Track
Length 5791 mm     (228 in)
Width 2159 mm     (85 in)
Height
Ground Clearance
Length / Wheelbase Ratio 1,46
Weight
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Thames
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type
Number of Cylinders and Placement S-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 10520 cc     (641,97 cu in)
Bore
Stroke
Bore / Stroke Ratio
Unitary Capacity 1753,33 cc/cylinder    (107 cu in/cylinder)
Number of Main Bearings
Compression Ratio
Fuel System Type
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter
Maximum Engine Power
Maximum Engine Power rpm
Maximum Engine Torque
Maximum Engine Torque rpm
Engine Torque at Max. Engine Power rpm
Power / Weight Ratio
Power / Engine Displacement Ratio
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type
Top Gear Ratio
Final Drive Ratio
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front)
Suspension (rear)
Brakes (front/rear)
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front) 990 x 90
Tyres (rear) 1320 x 90