[Türkçe]
[English]
[E-mail]
[Ads / Stats]
Homepage
Clubs
Teams
Competitors
Makes
Sponsors
Technical Specs of Cars
Search :
Homepage
›
Technical Specifications of Cars
›
Triumph
›
GT6 Mk III
1970 - Triumph - GT6 Mk III
All Technical Specifications
Technical Specs of This Model
1.
GT6 Mk III 1970
General Information
Make
Triumph
Model
GT6 Mk III
Production Year
1970
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type
2S FHC
Number of Doors
2
Wheelbase
2108 mm (83 in)
Front Track
1245 mm (49 in)
Rear Track
1245 mm (49 in)
Length
3785 mm (149 in)
Width
1448 mm (57 in)
Height
1194 mm (47 in)
Ground Clearance
Length / Wheelbase Ratio
1,8
Weight
863 kg (1900,9 lb)
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
C
x
Engine Specifications
Engine Manufacturer
Triumph
Engine Location
Front
Engine Alignment
Longitudinal
Engine Construction
Coolant Type
Water
Engine Type
OHV
Number of Cylinders and Placement
S-6
Valves per Cylinder
2 (Total of 12 Pieces)
Engine Displacement
1998 cc (121,93 cu in)
Bore
74,7 mm (2,94 in)
Stroke
76 mm (2,99 in)
Bore / Stroke Ratio
0,98
Unitary Capacity
333 cc/cylinder (20,32 cu in/cylinder)
Number of Main Bearings
Compression Ratio
9,25 : 1
Fuel System Type
2 St carbs
Aspiration Type
Normal
Compressor Type
-
Intercooler Type
None
Catalytic Converter
No
Maximum Engine Power
104 HP (77,6 kW)
Maximum Engine Power rpm
5300 d/d
Maximum Engine Torque
159 N.m (117,3 lb.ft , 16,2 kg.m)
Maximum Engine Torque rpm
3000 d/d
Engine Torque at Max. Engine Power rpm
139,7 N.m (5300 d/d)
Power / Weight Ratio
120,5 HP/ton (89,9 W/kg)
Power / Engine Displacement Ratio
52,1 HP/litre (38,8 kW/litre)
CO
2
Emissions
Fuel Consumption
Performance
0 - 80 km/h
8 s
0 - 60 mph
10,1 s
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
17,4 s
0 - 1000 m Acceleration
Top Speed
180 km/h (111,9 mph)
Gearbox and Transmission
Transmission Type
4M
Top Gear Ratio
1 : 1
Final Drive Ratio
3,27 : 1
Drive Wheels
RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front)
I.CS.
Suspension (rear)
I.TL.
Brakes (front/rear)
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)