Homepage Technical Specifications of Cars Marcos Mantara Spyder

1994 - Marcos - Mantara Spyder

Technical Specs of This Model
1. Mantara Spyder 1994
General Information
Make Marcos
Model Mantara Spyder
Production Year 1994
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2S DHC
Number of Doors 2
Wheelbase 2273 mm     (89,5 in)
Front Track 1450 mm     (57,1 in)
Rear Track 1400 mm     (55,1 in)
Length 4005 mm     (157,7 in)
Width 1680 mm     (66,1 in)
Height 1150 mm     (45,3 in)
Ground Clearance
Length / Wheelbase Ratio 1,76
Weight 1020 kg     (2246,7 lb)
Weight Distribution (front/rear) %51 / %49
Fuel Capacity 47 litre   (10,3 Imp gal ,  12,4 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Rover
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement V-8
Valves per Cylinder 2    (Total of 16 Pieces)
Engine Displacement 3946 cc     (240,8 cu in)
Bore 93,98 mm     (3,7 in)
Stroke 71,1 mm     (2,8 in)
Bore / Stroke Ratio 1,32
Unitary Capacity 493,25 cc/cylinder    (30,1 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 9,7 : 1
Fuel System Type Lucas L-Jet fuel inj.
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter
Maximum Engine Power 190 HP     (141,7 kW)
Maximum Engine Power rpm 4750 d/d
Maximum Engine Torque 319 N.m     (235,4 lb.ft ,  32,5 kg.m)
Maximum Engine Torque rpm 4000 d/d
Engine Torque at Max. Engine Power rpm 284,8 N.m    (4750 d/d)
Power / Weight Ratio 186,3 HP/ton    (138,9 W/kg)
Power / Engine Displacement Ratio 48,2 HP/litre    (35,9 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 4,5 s
0 - 60 mph 6 s
0 - 100 km/h
0 - 160 km/h 16,6 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 14,7 s
0 - 1000 m Acceleration 27 s
Top Speed 211 km/h   (131,1 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,79 : 1
Final Drive Ratio 3,14 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock) 2,8
Turning Circle Diameter 9,7 m    (31,8 ft)
Suspension (front) I.MS.CS.
Suspension (rear) I.U&LW.CS.
Brakes (front/rear) VeDi/Di
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)