Homepage Technical Specifications of Cars Mazda Cosmo 1800 AP

1979 - Mazda - Cosmo 1800 AP

Technical Specs of This Model
1. Cosmo 1800 AP 1979
General Information
Make Mazda
Model Cosmo 1800 AP
Production Year 1979
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors 2
Wheelbase 2510 mm     (98,8 in)
Front Track 1380 mm     (54,3 in)
Rear Track 1370 mm     (53,9 in)
Length 4470 mm     (176 in)
Width 1680 mm     (66,1 in)
Height 1330 mm     (52,4 in)
Ground Clearance 165 mm     (6,5 in)
Length / Wheelbase Ratio 1,78
Weight 1120 kg     (2467 lb)
Weight Distribution (front/rear) %56,7 / %43,3
Fuel Capacity 65 litre   (14,3 Imp gal ,  17,2 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Mazda
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1769 cc     (107,95 cu in)
Bore 80 mm     (3,15 in)
Stroke 88 mm     (3,46 in)
Bore / Stroke Ratio 0,91
Unitary Capacity 442,25 cc/cylinder    (26,99 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 8,6 : 1
Fuel System Type 1 Ni carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 100 HP     (74,6 kW)
Maximum Engine Power rpm 5500 d/d
Maximum Engine Torque 149 N.m     (110 lb.ft ,  15,2 kg.m)
Maximum Engine Torque rpm 3300 d/d
Engine Torque at Max. Engine Power rpm 129,5 N.m    (5500 d/d)
Power / Weight Ratio 89,3 HP/ton    (66,6 W/kg)
Power / Engine Displacement Ratio 56,5 HP/litre    (42,2 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 9,2 s
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 18,8 s
0 - 1000 m Acceleration
Top Speed 170 km/h   (105,7 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,85 : 1
Final Drive Ratio 4,1 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball
Steering Turns (lock to lock) 4,3
Turning Circle Diameter 11,2 m    (36,7 ft)
Suspension (front) I.MS.CS.LW.ARB.
Suspension (rear) RA.LTA.TA.PR.CS.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)