1962 - Humber - Hawk Ser III

Technical Specs of This Model
1. Hawk Ser III 1962
General Information
Make Humber
Model Hawk Ser III
Production Year 1962
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors
Wheelbase 2794 mm     (110 in)
Front Track 1441 mm     (56,7 in)
Rear Track 1410 mm     (55,5 in)
Length 4693 mm     (184,8 in)
Width 1765 mm     (69,5 in)
Height 1575 mm     (62 in)
Ground Clearance 152 mm     (6 in)
Length / Wheelbase Ratio 1,68
Weight 1435 kg     (3160,8 lb)
Weight Distribution (front/rear)
Fuel Capacity 72,7 litre   (16 Imp gal ,  19,2 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Humber
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 2267 cc     (138,34 cu in)
Bore 81 mm     (3,19 in)
Stroke 110 mm     (4,33 in)
Bore / Stroke Ratio 0,74
Unitary Capacity 566,75 cc/cylinder    (34,59 cu in/cylinder)
Number of Main Bearings
Compression Ratio 7,5 : 1
Fuel System Type 1 Ze carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 73 HP     (54,4 kW)
Maximum Engine Power rpm 4400 d/d
Maximum Engine Torque 163 N.m     (120,3 lb.ft ,  16,6 kg.m)
Maximum Engine Torque rpm 2300 d/d
Engine Torque at Max. Engine Power rpm 118,1 N.m    (4400 d/d)
Power / Weight Ratio 50,9 HP/ton    (37,9 W/kg)
Power / Engine Displacement Ratio 32,2 HP/litre    (24 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 14,4 s
0 - 60 mph
0 - 100 km/h
0 - 160 km/h -1 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 21,9 s
0 - 1000 m Acceleration
Top Speed 130 km/h   (80,8 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 4,22 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.CS.
Suspension (rear) LA.SE.
Brakes (front/rear) Di/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)