Homepage Technical Specifications of Cars Opel Signum 2.0 DTI

2003 - Opel - Signum 2.0 DTI

Technical Specs of This Model
1. Signum 2.0 DTI 2003
General Information
Make Opel
Model Signum 2.0 DTI
Production Year 2003
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S EST
Number of Doors 5
Wheelbase 2830 mm     (111,4 in)
Front Track 1524 mm     (60 in)
Rear Track 1512 mm     (59,5 in)
Length 4636 mm     (182,5 in)
Width 1796 mm     (70,7 in)
Height 1466 mm     (57,7 in)
Ground Clearance
Length / Wheelbase Ratio 1,64
Weight 1595 kg     (3513,2 lb)
Weight Distribution (front/rear)
Fuel Capacity 60 litre   (13,2 Imp gal ,  15,9 US gal)
Aerodynamics
Drag Coefficient 0,33
Frontal Area 2,2
Cx 0,73
Engine Specifications
Engine Manufacturer Opel
Engine Location Front
Engine Alignment Transverse
Engine Construction cast iron block & aluminium head
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 4    (Total of 16 Pieces)
Engine Displacement 1995 cc     (121,74 cu in)
Bore 84 mm     (3,31 in)
Stroke 90 mm     (3,54 in)
Bore / Stroke Ratio 0,93
Unitary Capacity 498,75 cc/cylinder    (30,44 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 18,5 : 1
Fuel System Type Direct diesel inj.
Aspiration Type Turbo D.
Compressor Type
Intercooler Type Yes
Catalytic Converter Yes
Maximum Engine Power 98 HP     (73,1 kW)
Maximum Engine Power rpm 3120 d/d
Maximum Engine Torque 230 N.m     (169,7 lb.ft ,  23,5 kg.m)
Maximum Engine Torque rpm 1500 d/d
Engine Torque at Max. Engine Power rpm 223,7 N.m    (3120 d/d)
Power / Weight Ratio 61,4 HP/ton    (45,8 W/kg)
Power / Engine Displacement Ratio 49,1 HP/litre    (36,6 kW/litre)
CO2 Emissions 159 g/km
Fuel Consumption 7.9/4.8/5.9 l/100km urban/extra-urban/combined
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h 14 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 185 km/h   (115 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,69 : 1
Final Drive Ratio 3,74 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock) 2,75
Turning Circle Diameter 12 m    (39,4 ft)
Suspension (front) I.MS.W.
Suspension (rear) I.MultiLi.CS.
Brakes (front/rear) VeDi/Di-S-ABS
Brake Disc Diameter (front) 285 mm
Brake Disc Diameter (rear) 278 mm
Wheels (front) 6.5J x 16
Wheels (rear) 6.5J x 16
Tyres (front) 215/55 R 16 H
Tyres (rear) 215/55 R 16 H