Homepage Technical Specifications of Cars Rambler Classic 550 Sedan

1963 - Rambler - Classic 550 Sedan

Technical Specs of This Model
1. Classic 550 Sedan 1963
General Information
Make Rambler
Model Classic 550 Sedan
Production Year 1963
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 2
Wheelbase 2845 mm     (112 in)
Front Track 1478 mm     (58,2 in)
Rear Track 1458 mm     (57,4 in)
Length 4796 mm     (188,8 in)
Width 1811 mm     (71,3 in)
Height 1387 mm     (54,6 in)
Ground Clearance
Length / Wheelbase Ratio 1,69
Weight 1202 kg     (2647,6 lb)
Weight Distribution (front/rear)
Fuel Capacity 72 litre   (15,8 Imp gal ,  19 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Hudson
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 3205 cc     (195,58 cu in)
Bore 79,37 mm     (3,12 in)
Stroke 108 mm     (4,25 in)
Bore / Stroke Ratio 0,73
Unitary Capacity 534,17 cc/cylinder    (32,6 cu in/cylinder)
Number of Main Bearings
Compression Ratio 8,7 : 1
Fuel System Type
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 127 HP     (94,7 kW)
Maximum Engine Power rpm 4200 d/d
Maximum Engine Torque 244 N.m     (180,1 lb.ft ,  24,9 kg.m)
Maximum Engine Torque rpm 1600 d/d
Engine Torque at Max. Engine Power rpm 215,3 N.m    (4200 d/d)
Power / Weight Ratio 105,7 HP/ton    (78,8 W/kg)
Power / Engine Displacement Ratio 39,6 HP/litre    (29,5 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 3M
Top Gear Ratio 1 : 1
Final Drive Ratio
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.CS.
Suspension (rear) LA.SE.
Brakes (front/rear) Dr/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front) 6.50 x 14
Tyres (rear) 6.50 x 14