Homepage › Technical Specifications of Cars › Abarth › 750 Coupe Vignale

1957 - Abarth - 750 Coupe Vignale

Technical Specs of This Model
1. 750 Coupe Vignale 1957
General Information
Make Abarth
Model 750 Coupe Vignale
Production Year 1957
Country
Designer Vignale
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2S FHC
Number of Doors 2
Wheelbase 2000 mm     (78,7 in)
Front Track 1150 mm     (45,3 in)
Rear Track 1160 mm     (45,7 in)
Length 3200 mm     (126 in)
Width 1410 mm     (55,5 in)
Height 1295 mm     (51 in)
Ground Clearance
Length / Wheelbase Ratio 1,6
Weight 550 kg     (1211,5 lb)
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Fiat
Engine Location Rear
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 747 cc     (45,58 cu in)
Bore 61 mm     (2,4 in)
Stroke 64 mm     (2,52 in)
Bore / Stroke Ratio 0,95
Unitary Capacity 186,75 cc/cylinder    (11,4 cu in/cylinder)
Number of Main Bearings
Compression Ratio 9,8 : 1
Fuel System Type 1 We carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 47 HP     (35 kW)
Maximum Engine Power rpm 6000 d/d
Maximum Engine Torque
Maximum Engine Torque rpm
Engine Torque at Max. Engine Power rpm 55,8 N.m    (6000 d/d)
Power / Weight Ratio 85,5 HP/ton    (63,7 W/kg)
Power / Engine Displacement Ratio 62,9 HP/litre    (46,9 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h -1 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 150 km/h   (93,2 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio
Final Drive Ratio
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.TL.
Suspension (rear) I.CS.
Brakes (front/rear)
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)