Homepage › Technical Specifications of Cars › Adler › Trumpf Junior

1935 - Adler - Trumpf Junior

Technical Specs of This Model
1. Trumpf Junior 1935
2. Trumpf Junior 1935
3. Trumpf Junior 1935
General Information
Make Adler
Model Trumpf Junior
Production Year 1935
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2S DHC
Number of Doors 2
Wheelbase 2921 mm     (115 in)
Front Track 1308 mm     (51,5 in)
Rear Track 1308 mm     (51,5 in)
Length
Width
Height
Ground Clearance
Length / Wheelbase Ratio
Weight
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Adler
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SV
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1645 cc     (100,38 cu in)
Bore 74,25 mm     (2,92 in)
Stroke 95 mm     (3,74 in)
Bore / Stroke Ratio 0,78
Unitary Capacity 411,25 cc/cylinder    (25,1 cu in/cylinder)
Number of Main Bearings
Compression Ratio
Fuel System Type
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power
Maximum Engine Power rpm
Maximum Engine Torque
Maximum Engine Torque rpm
Engine Torque at Max. Engine Power rpm
Power / Weight Ratio
Power / Engine Displacement Ratio
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio
Final Drive Ratio
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.TL.
Suspension (rear) I.QE.SwA.
Brakes (front/rear) Dr/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)