1913 - Adler - 14/18

Technical Specs of This Model
1. 14/18 1913
General Information
Make Adler
Model 14/18
Production Year 1913
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4S
Number of Doors
Wheelbase 2807 mm     (110,5 in)
Front Track 1295 mm     (51 in)
Rear Track 1295 mm     (51 in)
Length 3810 mm     (150 in)
Width 1676 mm     (66 in)
Height
Ground Clearance 178 mm     (7 in)
Length / Wheelbase Ratio 1,36
Weight
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Adler
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 2116 cc     (129,13 cu in)
Bore 75 mm     (2,95 in)
Stroke 120 mm     (4,72 in)
Bore / Stroke Ratio 0,62
Unitary Capacity 529 cc/cylinder    (32,28 cu in/cylinder)
Number of Main Bearings
Compression Ratio
Fuel System Type
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power
Maximum Engine Power rpm
Maximum Engine Torque
Maximum Engine Torque rpm
Engine Torque at Max. Engine Power rpm
Power / Weight Ratio
Power / Engine Displacement Ratio
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio
Final Drive Ratio
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front)
Suspension (rear)
Brakes (front/rear)
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front) 815 x 105
Tyres (rear) 815 x 105