Homepage › Technical Specifications of Cars › Allard › Palm Beach 21Z

1953 - Allard - Palm Beach 21Z

Technical Specs of This Model
1. Palm Beach 21Z 1953
General Information
Make Allard
Model Palm Beach 21Z
Production Year 1953
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2S DHC
Number of Doors 2
Wheelbase 2438 mm     (96 in)
Front Track 1295 mm     (51 in)
Rear Track 1270 mm     (50 in)
Length 3962 mm     (156 in)
Width 1500 mm     (59,1 in)
Height 1346 mm     (53 in)
Ground Clearance
Length / Wheelbase Ratio 1,63
Weight 889 kg     (1958,1 lb)
Weight Distribution (front/rear)
Fuel Capacity 45,5 litre   (10 Imp gal ,  12 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Ford
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 2262 cc     (138,04 cu in)
Bore 79,37 mm     (3,12 in)
Stroke 76,2 mm     (3 in)
Bore / Stroke Ratio 1,04
Unitary Capacity 377 cc/cylinder    (23,01 cu in/cylinder)
Number of Main Bearings
Compression Ratio 7,5 : 1
Fuel System Type 1 Ze carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 68 HP     (50,7 kW)
Maximum Engine Power rpm 4000 d/d
Maximum Engine Torque 165 N.m     (121,8 lb.ft ,  16,8 kg.m)
Maximum Engine Torque rpm 2000 d/d
Engine Torque at Max. Engine Power rpm 121,1 N.m    (4000 d/d)
Power / Weight Ratio 76,5 HP/ton    (57 W/kg)
Power / Engine Displacement Ratio 30,1 HP/litre    (22,4 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 3M
Top Gear Ratio 1 : 1
Final Drive Ratio 4,11 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.TB.
Suspension (rear) LA.CS.
Brakes (front/rear) Dr/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front) 6.40 x 13
Tyres (rear) 6.40 x 13