1980 - Audi - Quattro

Technical Specs of This Model
1. Quattro 1980
General Information
Make Audi
Model Quattro
Production Year 1980
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4S FHC
Number of Doors 2
Wheelbase 2522 mm     (99,3 in)
Front Track 1421 mm     (55,9 in)
Rear Track 1451 mm     (57,1 in)
Length 4404 mm     (173,4 in)
Width 1722 mm     (67,8 in)
Height 1346 mm     (53 in)
Ground Clearance
Length / Wheelbase Ratio 1,75
Weight 1290 kg     (2841,4 lb)
Weight Distribution (front/rear) %61 / %39
Fuel Capacity 70 litre   (15,4 Imp gal ,  18,5 US gal)
Aerodynamics
Drag Coefficient 0,43
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Audi
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement S-5
Valves per Cylinder 2    (Total of 10 Pieces)
Engine Displacement 2144 cc     (130,84 cu in)
Bore 79,5 mm     (3,13 in)
Stroke 86,4 mm     (3,4 in)
Bore / Stroke Ratio 0,92
Unitary Capacity 428,8 cc/cylinder    (26,17 cu in/cylinder)
Number of Main Bearings 6
Compression Ratio 7 : 1
Fuel System Type Bo K-Jet fuel inj.
Aspiration Type Turbo
Compressor Type 1 KKK 26 turbocharger
Intercooler Type Air/Air
Catalytic Converter No
Maximum Engine Power 200 HP     (149,1 kW)
Maximum Engine Power rpm 5500 d/d
Maximum Engine Torque 285 N.m     (210,3 lb.ft ,  29,1 kg.m)
Maximum Engine Torque rpm 3500 d/d
Engine Torque at Max. Engine Power rpm 258,9 N.m    (5500 d/d)
Power / Weight Ratio 155 HP/ton    (115,6 W/kg)
Power / Engine Displacement Ratio 93,3 HP/litre    (69,6 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 4,7 s
0 - 60 mph 7,3 s
0 - 100 km/h
0 - 160 km/h 20,7 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 15,2 s    @ 142 km/h    (88 mph)
0 - 1000 m Acceleration 27,7 s    @ 177 km/h    (110 mph)
Top Speed 220 km/h   (136,7 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,78 : 1
Final Drive Ratio 3,89 : 1
Drive Wheels AWD (All Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock)
Turning Circle Diameter 11,3 m    (37,1 ft)
Suspension (front) I.MS.CS.LW.ARB.
Suspension (rear) I.MS.CS.LW.ARB.
Brakes (front/rear) VeDi/Di-S-ABS
Brake Disc Diameter (front) 280 mm
Brake Disc Diameter (rear) 280 mm
Wheels (front) 6.0J x 15
Wheels (rear) 6.0J x 15
Tyres (front) 205/60 VR 15
Tyres (rear) 205/60 VR 15