Homepage Technical Specifications of Cars Daihatsu Leeza Turbo Injection

1989 - Daihatsu - Leeza Turbo Injection

Technical Specs of This Model
1. Leeza Turbo Injection 1989
General Information
Make Daihatsu
Model Leeza Turbo Injection
Production Year 1989
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4S HBK
Number of Doors 3
Wheelbase 2130 mm     (83,9 in)
Front Track 1215 mm     (47,8 in)
Rear Track 1205 mm     (47,4 in)
Length 3195 mm     (125,8 in)
Width 1395 mm     (54,9 in)
Height 1335 mm     (52,6 in)
Ground Clearance 165 mm     (6,5 in)
Length / Wheelbase Ratio 1,5
Weight 610 kg     (1343,6 lb)
Weight Distribution (front/rear)
Fuel Capacity 28 litre   (6,2 Imp gal ,  7,4 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Daihatsu
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-3
Valves per Cylinder 2    (Total of 6 Pieces)
Engine Displacement 548 cc     (33,44 cu in)
Bore 62 mm     (2,44 in)
Stroke 60,5 mm     (2,38 in)
Bore / Stroke Ratio 1,02
Unitary Capacity 182,67 cc/cylinder    (11,15 cu in/cylinder)
Number of Main Bearings 4
Compression Ratio 8 : 1
Fuel System Type EFi
Aspiration Type Turbo
Compressor Type
Intercooler Type Air/Air
Catalytic Converter Yes
Maximum Engine Power 63 HP     (47 kW)
Maximum Engine Power rpm 7000 d/d
Maximum Engine Torque 76 N.m     (56,1 lb.ft ,  7,8 kg.m)
Maximum Engine Torque rpm 4000 d/d
Engine Torque at Max. Engine Power rpm 64,1 N.m    (7000 d/d)
Power / Weight Ratio 103,3 HP/ton    (77 W/kg)
Power / Engine Displacement Ratio 115 HP/litre    (85,7 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 145 km/h   (90,1 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,79 : 1
Final Drive Ratio 5,33 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion
Steering Turns (lock to lock)
Turning Circle Diameter 9 m    (29,5 ft)
Suspension (front) I.MS.ARB.
Suspension (rear) I.STA.CS.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front) 155/70 SR 12
Tyres (rear) 155/70 SR 12