Homepage Technical Specifications of Cars Daihatsu Applause Automatic

1991 - Daihatsu - Applause Automatic

Technical Specs of This Model
1. Applause Automatic 1991
2. Applause Automatic 1991
General Information
Make Daihatsu
Model Applause Automatic
Production Year 1991
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2470 mm     (97,2 in)
Front Track 1425 mm     (56,1 in)
Rear Track 1415 mm     (55,7 in)
Length 4260 mm     (167,7 in)
Width 1660 mm     (65,4 in)
Height 1375 mm     (54,1 in)
Ground Clearance 150 mm     (5,9 in)
Length / Wheelbase Ratio 1,72
Weight 990 kg     (2180,6 lb)
Weight Distribution (front/rear)
Fuel Capacity 50 litre   (11 Imp gal ,  13,2 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Daihatsu
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 4    (Total of 16 Pieces)
Engine Displacement 1590 cc     (97,03 cu in)
Bore 76 mm     (2,99 in)
Stroke 87,6 mm     (3,45 in)
Bore / Stroke Ratio 0,87
Unitary Capacity 397,5 cc/cylinder    (24,26 cu in/cylinder)
Number of Main Bearings
Compression Ratio 9,5 : 1
Fuel System Type 1 carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 103 HP     (76,8 kW)
Maximum Engine Power rpm 6000 d/d
Maximum Engine Torque 134 N.m     (98,9 lb.ft ,  13,7 kg.m)
Maximum Engine Torque rpm 4800 d/d
Engine Torque at Max. Engine Power rpm 122,2 N.m    (6000 d/d)
Power / Weight Ratio 104 HP/ton    (77,6 W/kg)
Power / Engine Displacement Ratio 64,8 HP/litre    (48,3 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 3A
Top Gear Ratio 1 : 1
Final Drive Ratio 3,33 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.CS.
Suspension (rear) I.CS.
Brakes (front/rear) Di/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)