Homepage › Technical Specifications of Cars › Daihatsu › Fellow Max GXL Hardtop

1970 - Daihatsu - Fellow Max GXL Hardtop

Technical Specs of This Model
1. Fellow Max GXL Hardtop 1970
General Information
Make Daihatsu
Model Fellow Max GXL Hardtop
Production Year 1970
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors
Wheelbase 2090 mm     (82,3 in)
Front Track 1120 mm     (44,1 in)
Rear Track 1120 mm     (44,1 in)
Length 2995 mm     (117,9 in)
Width 1295 mm     (51 in)
Height 1245 mm     (49 in)
Ground Clearance
Length / Wheelbase Ratio 1,43
Weight 495 kg     (1090,3 lb)
Weight Distribution (front/rear) %63 / %37
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Daihatsu
Engine Location Front
Engine Alignment
Engine Construction
Coolant Type
Engine Type TS
Number of Cylinders and Placement S-2
Valves per Cylinder
Engine Displacement 356 cc     (21,72 cu in)
Bore 62 mm     (2,44 in)
Stroke 59 mm     (2,32 in)
Bore / Stroke Ratio 1,05
Unitary Capacity 178 cc/cylinder    (10,86 cu in/cylinder)
Number of Main Bearings
Compression Ratio 11 : 1
Fuel System Type 2 Mikuni carbs
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 40 HP     (29,8 kW)
Maximum Engine Power rpm 7200 d/d
Maximum Engine Torque 40 N.m     (29,5 lb.ft ,  4,1 kg.m)
Maximum Engine Torque rpm 6500 d/d
Engine Torque at Max. Engine Power rpm 39,6 N.m    (7200 d/d)
Power / Weight Ratio 80,8 HP/ton    (60,3 W/kg)
Power / Engine Displacement Ratio 112,4 HP/litre    (83,8 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h -1 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 120 km/h   (74,6 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1,27 : 1
Final Drive Ratio 4,45 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.MS.CS.LW.
Suspension (rear) I.STA.CS.
Brakes (front/rear) Di/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)