Homepage Technical Specifications of Cars Daihatsu Max Cuore Standard

1979 - Daihatsu - Max Cuore Standard

Technical Specs of This Model
1. Max Cuore Standard 1979
General Information
Make Daihatsu
Model Max Cuore Standard
Production Year 1979
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4S SAL
Number of Doors 4
Wheelbase 2090 mm     (82,3 in)
Front Track 1220 mm     (48 in)
Rear Track 1220 mm     (48 in)
Length 3160 mm     (124,4 in)
Width 1390 mm     (54,7 in)
Height 1320 mm     (52 in)
Ground Clearance 180 mm     (7,1 in)
Length / Wheelbase Ratio 1,51
Weight 560 kg     (1233,5 lb)
Weight Distribution (front/rear) %64 / %36
Fuel Capacity 26 litre   (5,7 Imp gal ,  6,9 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Daihatsu
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-2
Valves per Cylinder 2    (Total of 4 Pieces)
Engine Displacement 547 cc     (33,38 cu in)
Bore 71,6 mm     (2,82 in)
Stroke 68 mm     (2,68 in)
Bore / Stroke Ratio 1,05
Unitary Capacity 273,5 cc/cylinder    (16,69 cu in/cylinder)
Number of Main Bearings 3
Compression Ratio 8,7 : 1
Fuel System Type 1 Ai carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 28 HP     (20,9 kW)
Maximum Engine Power rpm 6000 d/d
Maximum Engine Torque 38 N.m     (28 lb.ft ,  3,9 kg.m)
Maximum Engine Torque rpm 3500 d/d
Engine Torque at Max. Engine Power rpm 33,2 N.m    (6000 d/d)
Power / Weight Ratio 50 HP/ton    (37,3 W/kg)
Power / Engine Displacement Ratio 51,2 HP/litre    (38,2 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 21,8 s
0 - 1000 m Acceleration
Top Speed 110 km/h   (68,4 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1,27 : 1
Final Drive Ratio 3,96 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion
Steering Turns (lock to lock) 3,3
Turning Circle Diameter 9,2 m    (30,2 ft)
Suspension (front) I.MS.CS.LW.
Suspension (rear) I.STA.CS.
Brakes (front/rear) Dr/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)