Homepage Technical Specifications of Cars Daihatsu Charmant 1200 Custom Sedan

1977 - Daihatsu - Charmant 1200 Custom Sedan

Technical Specs of This Model
1. Charmant 1200 Custom Sedan 1977
General Information
Make Daihatsu
Model Charmant 1200 Custom Sedan
Production Year 1977
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2330 mm     (91,7 in)
Front Track 1250 mm     (49,2 in)
Rear Track 1240 mm     (48,8 in)
Length 3990 mm     (157,1 in)
Width 1520 mm     (59,8 in)
Height 1520 mm     (59,8 in)
Ground Clearance 170 mm     (6,7 in)
Length / Wheelbase Ratio 1,71
Weight 825 kg     (1817,2 lb)
Weight Distribution (front/rear)
Fuel Capacity 43 litre   (9,5 Imp gal ,  11,4 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Toyota
Engine Location Front
Engine Alignment Longitudinal
Engine Construction cast iron block & light alloy head
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1166 cc     (71,15 cu in)
Bore 75 mm     (2,95 in)
Stroke 66 mm     (2,6 in)
Bore / Stroke Ratio 1,14
Unitary Capacity 291,5 cc/cylinder    (17,79 cu in/cylinder)
Number of Main Bearings 3
Compression Ratio 9 : 1
Fuel System Type 1 Aisan 3K carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 63 HP     (47 kW)
Maximum Engine Power rpm 5800 d/d
Maximum Engine Torque 90 N.m     (66,4 lb.ft ,  9,2 kg.m)
Maximum Engine Torque rpm 3600 d/d
Engine Torque at Max. Engine Power rpm 77,3 N.m    (5800 d/d)
Power / Weight Ratio 76,4 HP/ton    (56,9 W/kg)
Power / Engine Displacement Ratio 54 HP/litre    (40,3 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,86 : 1
Final Drive Ratio
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball
Steering Turns (lock to lock) 3,4
Turning Circle Diameter
Suspension (front) I.MS.CS.LW.ARB.
Suspension (rear) LA.SE.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front) 4.5 x 12
Wheels (rear) 4.5 x 12
Tyres (front) 6.00 x 12
Tyres (rear) 6.00 x 12