Homepage Technical Specifications of Cars Fiat 132 Diesel 2500

1979 - Fiat - 132 Diesel 2500

Technical Specs of This Model
1. 132 Diesel 2500 1979
General Information
Make Fiat
Model 132 Diesel 2500
Production Year 1979
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2560 mm     (100,8 in)
Front Track 1320 mm     (52 in)
Rear Track 1330 mm     (52,4 in)
Length 4390 mm     (172,8 in)
Width 1640 mm     (64,6 in)
Height 1430 mm     (56,3 in)
Ground Clearance 125 mm     (4,9 in)
Length / Wheelbase Ratio 1,71
Weight 1230 kg     (2709,3 lb)
Weight Distribution (front/rear)
Fuel Capacity 56 litre   (12,3 Imp gal ,  14,8 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Fiat
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 2445 cc     (149,2 cu in)
Bore 93 mm     (3,66 in)
Stroke 90 mm     (3,54 in)
Bore / Stroke Ratio 1,03
Unitary Capacity 611,25 cc/cylinder    (37,3 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 22 : 1
Fuel System Type Bo diesel pump
Aspiration Type Normal D.
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 72 HP     (53,7 kW)
Maximum Engine Power rpm 4200 d/d
Maximum Engine Torque 147 N.m     (108,5 lb.ft ,  15 kg.m)
Maximum Engine Torque rpm 2400 d/d
Engine Torque at Max. Engine Power rpm 122,1 N.m    (4200 d/d)
Power / Weight Ratio 58,5 HP/ton    (43,7 W/kg)
Power / Engine Displacement Ratio 29,4 HP/litre    (22 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 20,8 s
0 - 1000 m Acceleration
Top Speed 150 km/h   (93,2 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,87 : 1
Final Drive Ratio 3,73 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball PAS
Steering Turns (lock to lock) 2,9
Turning Circle Diameter 10,8 m    (35,4 ft)
Suspension (front) I.W.CS.ARB.
Suspension (rear) RA.LoTrailRA.TA.CS.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)