Homepage Technical Specifications of Cars Fiat Dino 2.4 Spider

1969 - Fiat - Dino 2.4 Spider

Technical Specs of This Model
1. Dino 2.4 Spider 1969
General Information
Make Fiat
Model Dino 2.4 Spider
Production Year 1969
Country
Designer Pininfarina
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2S DHC
Number of Doors 2
Wheelbase 2280 mm     (89,8 in)
Front Track 1383 mm     (54,4 in)
Rear Track 1381 mm     (54,4 in)
Length 4134 mm     (162,8 in)
Width 1710 mm     (67,3 in)
Height 1270 mm     (50 in)
Ground Clearance 120 mm     (4,7 in)
Length / Wheelbase Ratio 1,81
Weight 1240 kg     (2731,3 lb)
Weight Distribution (front/rear)
Fuel Capacity 70 litre   (15,4 Imp gal ,  18,5 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Ferrari
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement V-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 2419 cc     (147,62 cu in)
Bore 92,5 mm     (3,64 in)
Stroke 60 mm     (2,36 in)
Bore / Stroke Ratio 1,54
Unitary Capacity 403,17 cc/cylinder    (24,6 cu in/cylinder)
Number of Main Bearings 4
Compression Ratio 9 : 1
Fuel System Type 3 We carbs
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 180 HP     (134,2 kW)
Maximum Engine Power rpm 6600 d/d
Maximum Engine Torque 216 N.m     (159,4 lb.ft ,  22 kg.m)
Maximum Engine Torque rpm 4600 d/d
Engine Torque at Max. Engine Power rpm 194,2 N.m    (6600 d/d)
Power / Weight Ratio 145,2 HP/ton    (108,2 W/kg)
Power / Engine Displacement Ratio 74,4 HP/litre    (55,5 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 15,5 s
0 - 1000 m Acceleration
Top Speed 210 km/h   (130,5 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,87 : 1
Final Drive Ratio 4,78 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type worm & roller
Steering Turns (lock to lock) 3
Turning Circle Diameter 11,5 m    (37,7 ft)
Suspension (front) I.CS.W.
Suspension (rear) I.CS.MS.
Brakes (front/rear) VeDi/VeDi-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)