Homepage Technical Specifications of Cars Fiat Multipla 100 16v SX

1998 - Fiat - Multipla 100 16v SX

Technical Specs of This Model
1. Multipla 100 16v SX 1998
General Information
Make Fiat
Model Multipla 100 16v SX
Production Year 1998
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 5/6S MPV
Number of Doors 5
Wheelbase 2666 mm     (105 in)
Front Track 1511 mm     (59,5 in)
Rear Track 1520 mm     (59,8 in)
Length 3994 mm     (157,2 in)
Width 1871 mm     (73,7 in)
Height 1670 mm     (65,7 in)
Ground Clearance
Length / Wheelbase Ratio 1,5
Weight 1300 kg     (2863,4 lb)
Weight Distribution (front/rear)
Fuel Capacity 63 litre   (13,9 Imp gal ,  16,6 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Fiat
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 4    (Total of 16 Pieces)
Engine Displacement 1581 cc     (96,48 cu in)
Bore 86,4 mm     (3,4 in)
Stroke 67,46 mm     (2,66 in)
Bore / Stroke Ratio 1,28
Unitary Capacity 395,25 cc/cylinder    (24,12 cu in/cylinder)
Number of Main Bearings
Compression Ratio 10,5 : 1
Fuel System Type EFi
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 103 HP     (76,8 kW)
Maximum Engine Power rpm 5750 d/d
Maximum Engine Torque 144 N.m     (106,3 lb.ft ,  14,7 kg.m)
Maximum Engine Torque rpm 4000 d/d
Engine Torque at Max. Engine Power rpm 127,6 N.m    (5750 d/d)
Power / Weight Ratio 79,2 HP/ton    (59,1 W/kg)
Power / Engine Displacement Ratio 65,1 HP/litre    (48,6 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h 12,6 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration 34,4 s
Top Speed 170 km/h   (105,7 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,95 : 1
Final Drive Ratio 3,93 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock)
Turning Circle Diameter 11 m    (36,1 ft)
Suspension (front) I.MS.LW.CS.ARB.
Suspension (rear) I.CS.ARB.
Brakes (front/rear) VeDi/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)