Homepage Technical Specifications of Cars Ford Crown Victoria

2001 - Ford - Crown Victoria

Technical Specs of This Model
1. Crown Victoria 1992
2. Crown Victoria 1992
3. Crown Victoria 2001
4. Crown Victoria 2003
General Information
Make Ford
Model Crown Victoria
Production Year 2001
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2913 mm     (114,7 in)
Front Track 1610 mm     (63,4 in)
Rear Track 1659 mm     (65,3 in)
Length 5385 mm     (212 in)
Width 1986 mm     (78,2 in)
Height 1443 mm     (56,8 in)
Ground Clearance
Length / Wheelbase Ratio 1,85
Weight 1777 kg     (3914,1 lb)
Weight Distribution (front/rear)
Fuel Capacity 72 litre   (15,8 Imp gal ,  19 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Ford
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement V-8
Valves per Cylinder 2    (Total of 16 Pieces)
Engine Displacement 4601 cc     (280,77 cu in)
Bore 90,2 mm     (3,55 in)
Stroke 90 mm     (3,54 in)
Bore / Stroke Ratio 1
Unitary Capacity 575,12 cc/cylinder    (35,1 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 9,4 : 1
Fuel System Type SMPFi
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 220 HP     (164,1 kW)
Maximum Engine Power rpm 4750 d/d
Maximum Engine Torque 359 N.m     (264,9 lb.ft ,  36,6 kg.m)
Maximum Engine Torque rpm 4000 d/d
Engine Torque at Max. Engine Power rpm 329,8 N.m    (4750 d/d)
Power / Weight Ratio 123,8 HP/ton    (92,3 W/kg)
Power / Engine Displacement Ratio 47,8 HP/litre    (35,7 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 4A
Top Gear Ratio 0,7 : 1
Final Drive Ratio 2,73 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type ball & nut VPAS
Steering Turns (lock to lock)
Turning Circle Diameter 12,3 m    (40,4 ft)
Suspension (front) I.CS.ARB.
Suspension (rear) I.WL.ARB.
Brakes (front/rear) Di/Di-S-ABS
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)