Homepage Technical Specifications of Cars GAZ Volga 24 Indenor Diesel

1979 - GAZ - Volga 24 Indenor Diesel

Technical Specs of This Model
1. Volga 24 Indenor Diesel 1979
General Information
Make GAZ
Model Volga 24 Indenor Diesel
Production Year 1979
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2800 mm     (110,2 in)
Front Track 1470 mm     (57,9 in)
Rear Track 1420 mm     (55,9 in)
Length 4735 mm     (186,4 in)
Width 1800 mm     (70,9 in)
Height 1490 mm     (58,7 in)
Ground Clearance 180 mm     (7,1 in)
Length / Wheelbase Ratio 1,69
Weight 1300 kg     (2863,4 lb)
Weight Distribution (front/rear)
Fuel Capacity 55 litre   (12,1 Imp gal ,  14,5 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Peugeot
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 2112 cc     (128,88 cu in)
Bore 90 mm     (3,54 in)
Stroke 83 mm     (3,27 in)
Bore / Stroke Ratio 1,08
Unitary Capacity 528 cc/cylinder    (32,22 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 22,2 : 1
Fuel System Type diesel injection pump
Aspiration Type Normal D.
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 59 HP     (44 kW)
Maximum Engine Power rpm 4500 d/d
Maximum Engine Torque 117 N.m     (86,3 lb.ft ,  11,9 kg.m)
Maximum Engine Torque rpm 2500 d/d
Engine Torque at Max. Engine Power rpm 93,4 N.m    (4500 d/d)
Power / Weight Ratio 45,4 HP/ton    (33,8 W/kg)
Power / Engine Displacement Ratio 27,9 HP/litre    (20,8 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 135 km/h   (83,9 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 4,1 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type worm & roller
Steering Turns (lock to lock) 3,5
Turning Circle Diameter 12,4 m    (40,7 ft)
Suspension (front) I.W.CS.ARB.
Suspension (rear) LA.SE.
Brakes (front/rear) Dr/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)