1963 - Hillman - Imp

Technical Specs of This Model
1. Imp 1963
2. Imp 1972
General Information
Make Hillman
Model Imp
Production Year 1963
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 2
Wheelbase 2082 mm     (82 in)
Front Track 1245 mm     (49 in)
Rear Track 1219 mm     (48 in)
Length 3580 mm     (140,9 in)
Width 1530 mm     (60,2 in)
Height 1384 mm     (54,5 in)
Ground Clearance 140 mm     (5,5 in)
Length / Wheelbase Ratio 1,72
Weight 711 kg     (1566,1 lb)
Weight Distribution (front/rear)
Fuel Capacity 27,3 litre   (6 Imp gal ,  7,2 US gal)
Aerodynamics
Drag Coefficient 0,38
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Hillman
Engine Location Rear
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 875 cc     (53,4 cu in)
Bore 68 mm     (2,68 in)
Stroke 60,4 mm     (2,38 in)
Bore / Stroke Ratio 1,13
Unitary Capacity 218,75 cc/cylinder    (13,35 cu in/cylinder)
Number of Main Bearings 3
Compression Ratio 10 : 1
Fuel System Type 1 So carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 39 HP     (29,1 kW)
Maximum Engine Power rpm 5000 d/d
Maximum Engine Torque 71 N.m     (52,4 lb.ft ,  7,2 kg.m)
Maximum Engine Torque rpm 2800 d/d
Engine Torque at Max. Engine Power rpm 55,5 N.m    (5000 d/d)
Power / Weight Ratio 54,9 HP/ton    (40,9 W/kg)
Power / Engine Displacement Ratio 44,6 HP/litre    (33,2 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 14,7 s
0 - 60 mph
0 - 100 km/h
0 - 160 km/h -1 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 21,8 s
0 - 1000 m Acceleration
Top Speed 129 km/h   (80,2 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 0,85 : 1
Final Drive Ratio 4,86 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock) 2,75
Turning Circle Diameter 9,3 m    (30,5 ft)
Suspension (front) I.CS.
Suspension (rear) I.CS.
Brakes (front/rear) Dr/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)