Homepage Technical Specifications of Cars Hillman Hunter De Luxe Saloon

1972 - Hillman - Hunter De Luxe Saloon

Technical Specs of This Model
1. Hunter De Luxe Saloon 1972
General Information
Make Hillman
Model Hunter De Luxe Saloon
Production Year 1972
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2502 mm     (98,5 in)
Front Track 1321 mm     (52 in)
Rear Track 1321 mm     (52 in)
Length 4267 mm     (168 in)
Width 1613 mm     (63,5 in)
Height 1422 mm     (56 in)
Ground Clearance 171 mm     (6,7 in)
Length / Wheelbase Ratio 1,71
Weight 885 kg     (1949,3 lb)
Weight Distribution (front/rear) %55 / %45
Fuel Capacity 45 litre   (9,9 Imp gal ,  11,9 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Hillman
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1496 cc     (91,29 cu in)
Bore 81,53 mm     (3,21 in)
Stroke 71,63 mm     (2,82 in)
Bore / Stroke Ratio 1,14
Unitary Capacity 374 cc/cylinder    (22,82 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 8,4 : 1
Fuel System Type 1 Ze-St carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 54 HP     (40,3 kW)
Maximum Engine Power rpm 4600 d/d
Maximum Engine Torque 99 N.m     (73,1 lb.ft ,  10,1 kg.m)
Maximum Engine Torque rpm 2500 d/d
Engine Torque at Max. Engine Power rpm 83,6 N.m    (4600 d/d)
Power / Weight Ratio 61 HP/ton    (45,5 W/kg)
Power / Engine Displacement Ratio 36,1 HP/litre    (26,9 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 12,5 s
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 133 km/h   (82,7 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 3,89 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball
Steering Turns (lock to lock) 3,8
Turning Circle Diameter 11 m    (36,1 ft)
Suspension (front) I.CS.LW.ARB.
Suspension (rear) Ra.SE.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)