Homepage Technical Specifications of Cars Hudson Rambler Custom

1957 - Hudson - Rambler Custom

Technical Specs of This Model
1. Rambler Custom 1957
General Information
Make Hudson
Model Rambler Custom
Production Year 1957
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors
Wheelbase 2743 mm     (108 in)
Front Track 1467 mm     (57,8 in)
Rear Track 1473 mm     (58 in)
Length 4851 mm     (191 in)
Width 1803 mm     (71 in)
Height 1473 mm     (58 in)
Ground Clearance 210 mm     (8,3 in)
Length / Wheelbase Ratio 1,77
Weight 1334 kg     (2938,3 lb)
Weight Distribution (front/rear)
Fuel Capacity 75 litre   (16,5 Imp gal ,  19,8 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Hudson
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 3205 cc     (195,58 cu in)
Bore 79,4 mm     (3,13 in)
Stroke 107,9 mm     (4,25 in)
Bore / Stroke Ratio 0,74
Unitary Capacity 534,17 cc/cylinder    (32,6 cu in/cylinder)
Number of Main Bearings
Compression Ratio 8,3 : 1
Fuel System Type 1 Ca carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 125 HP     (93,2 kW)
Maximum Engine Power rpm 4200 d/d
Maximum Engine Torque 230 N.m     (169,7 lb.ft ,  23,5 kg.m)
Maximum Engine Torque rpm 1600 d/d
Engine Torque at Max. Engine Power rpm 211,9 N.m    (4200 d/d)
Power / Weight Ratio 93,7 HP/ton    (69,9 W/kg)
Power / Engine Displacement Ratio 39 HP/litre    (29,1 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 3A
Top Gear Ratio 1 : 1
Final Drive Ratio
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front)
Suspension (rear)
Brakes (front/rear) Dr/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)