1930 - Humber - Snipe 80

Technical Specs of This Model
1. Snipe 80 1930
General Information
Make Humber
Model Snipe 80
Production Year 1930
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type
Number of Doors
Wheelbase 3048 mm     (120 in)
Front Track
Rear Track
Length 4394 mm     (173 in)
Width 1727 mm     (68 in)
Height
Ground Clearance
Length / Wheelbase Ratio 1,44
Weight 1715 kg     (3777,5 lb)
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Humber
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type Oise
Number of Cylinders and Placement S-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 3498 cc     (213,46 cu in)
Bore 80 mm     (3,15 in)
Stroke 116 mm     (4,57 in)
Bore / Stroke Ratio 0,69
Unitary Capacity 583 cc/cylinder    (35,58 cu in/cylinder)
Number of Main Bearings
Compression Ratio
Fuel System Type 1 St carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power
Maximum Engine Power rpm
Maximum Engine Torque
Maximum Engine Torque rpm
Engine Torque at Max. Engine Power rpm
Power / Weight Ratio
Power / Engine Displacement Ratio
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 18 s
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 121 km/h   (75,2 mph)
Gearbox and Transmission
Transmission Type
Top Gear Ratio
Final Drive Ratio
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) LA.SE.
Suspension (rear) LA.SE.
Brakes (front/rear)
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)