[Türkçe]
[English]
[E-mail]
[Ads / Stats]
Homepage
Clubs
Teams
Competitors
Makes
Sponsors
Technical Specs of Cars
Search :
Homepage
›
Technical Specifications of Cars
›
Humber
›
Super Snipe Mk II
1948 - Humber - Super Snipe Mk II
All Technical Specifications
Technical Specs of This Model
1.
Super Snipe Mk II 1948
General Information
Make
Humber
Model
Super Snipe Mk II
Production Year
1948
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type
4/5S SAL
Number of Doors
4
Wheelbase
2985 mm (117,5 in)
Front Track
1550 mm (61 in)
Rear Track
1550 mm (61 in)
Length
4763 mm (187,5 in)
Width
1892 mm (74,5 in)
Height
Ground Clearance
178 mm (7 in)
Length / Wheelbase Ratio
1,6
Weight
1746 kg (3845,8 lb)
Weight Distribution (front/rear)
Fuel Capacity
68,2 litre (15 Imp gal , 18 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
C
x
Engine Specifications
Engine Manufacturer
Humber
Engine Location
Front
Engine Alignment
Longitudinal
Engine Construction
Coolant Type
Water
Engine Type
SV
Number of Cylinders and Placement
S-6
Valves per Cylinder
2 (Total of 12 Pieces)
Engine Displacement
4086 cc (249,34 cu in)
Bore
85 mm (3,35 in)
Stroke
120 mm (4,72 in)
Bore / Stroke Ratio
0,71
Unitary Capacity
681 cc/cylinder (41,56 cu in/cylinder)
Number of Main Bearings
Compression Ratio
6,25 : 1
Fuel System Type
1 St carb
Aspiration Type
Normal
Compressor Type
-
Intercooler Type
None
Catalytic Converter
No
Maximum Engine Power
100 HP (74,6 kW)
Maximum Engine Power rpm
3400 d/d
Maximum Engine Torque
Maximum Engine Torque rpm
Engine Torque at Max. Engine Power rpm
209,4 N.m (3400 d/d)
Power / Weight Ratio
57,3 HP/ton (42,7 W/kg)
Power / Engine Displacement Ratio
24,5 HP/litre (18,3 kW/litre)
CO
2
Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type
4M
Top Gear Ratio
1 : 1
Final Drive Ratio
4,1 : 1
Drive Wheels
RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
12,3 m (40,4 ft)
Suspension (front)
I.TL.
Suspension (rear)
LA.SE.
Brakes (front/rear)
Dr/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)