1965 - Iso - Grifo GL365

Technical Specs of This Model
1. Grifo GL365 1965
General Information
Make Iso
Model Grifo GL365
Production Year 1965
Country
Designer Bertone
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2S FHC
Number of Doors 2
Wheelbase 2489 mm     (98 in)
Front Track 1410 mm     (55,5 in)
Rear Track 1410 mm     (55,5 in)
Length 4440 mm     (174,8 in)
Width 1765 mm     (69,5 in)
Height 1194 mm     (47 in)
Ground Clearance 121 mm     (4,8 in)
Length / Wheelbase Ratio 1,78
Weight 1450 kg     (3193,8 lb)
Weight Distribution (front/rear) %49,4 / %50,6
Fuel Capacity 100 litre   (22 Imp gal ,  26,4 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer GM
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement V-8
Valves per Cylinder 2    (Total of 16 Pieces)
Engine Displacement 5354 cc     (326,72 cu in)
Bore 101,6 mm     (4 in)
Stroke 82,55 mm     (3,25 in)
Bore / Stroke Ratio 1,23
Unitary Capacity 669,25 cc/cylinder    (40,84 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 11 : 1
Fuel System Type 1 Ho carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 365 HP     (272,2 kW)
Maximum Engine Power rpm 6000 d/d
Maximum Engine Torque 488 N.m     (360,1 lb.ft ,  49,8 kg.m)
Maximum Engine Torque rpm 4000 d/d
Engine Torque at Max. Engine Power rpm 433,2 N.m    (6000 d/d)
Power / Weight Ratio 251,7 HP/ton    (187,7 W/kg)
Power / Engine Displacement Ratio 68,2 HP/litre    (50,8 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 5,7 s
0 - 60 mph 7,4 s
0 - 100 km/h
0 - 160 km/h 16,9 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 14,9 s
0 - 1000 m Acceleration 27,1 s
Top Speed 259 km/h   (161 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 1 : 1
Final Drive Ratio 3,07 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball
Steering Turns (lock to lock) 4,5
Turning Circle Diameter
Suspension (front) I.W.CS.
Suspension (rear) dD.L&TL.CS.
Brakes (front/rear) Di/Di-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)