1986 - Lamborghini - LM002

Technical Specs of This Model
1. LM002 1986
2. LM002 1991
General Information
Make Lamborghini
Model LM002
Production Year 1986
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4S ORV
Number of Doors 4
Wheelbase 3000 mm     (118,1 in)
Front Track 1615 mm     (63,6 in)
Rear Track 1615 mm     (63,6 in)
Length 4902 mm     (193 in)
Width 2002 mm     (78,8 in)
Height 1849 mm     (72,8 in)
Ground Clearance 295 mm     (11,6 in)
Length / Wheelbase Ratio 1,63
Weight 2692 kg     (5929,5 lb)
Weight Distribution (front/rear)
Fuel Capacity 169 litre   (37,2 Imp gal ,  44,6 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Lamborghini
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement V-12
Valves per Cylinder 4    (Total of 48 Pieces)
Engine Displacement 5167 cc     (315,31 cu in)
Bore 85,5 mm     (3,37 in)
Stroke 75 mm     (2,95 in)
Bore / Stroke Ratio 1,14
Unitary Capacity 430,58 cc/cylinder    (26,28 cu in/cylinder)
Number of Main Bearings 7
Compression Ratio 9,5 : 1
Fuel System Type 6 We carbs
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 420 HP     (313,2 kW)
Maximum Engine Power rpm 6800 d/d
Maximum Engine Torque 500 N.m     (369 lb.ft ,  51 kg.m)
Maximum Engine Torque rpm 4500 d/d
Engine Torque at Max. Engine Power rpm 439,8 N.m    (6800 d/d)
Power / Weight Ratio 156 HP/ton    (116,3 W/kg)
Power / Engine Displacement Ratio 81,3 HP/litre    (60,6 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph 8,1 s
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 201 km/h   (124,9 mph)
Gearbox and Transmission
Transmission Type 2 x 5M
Top Gear Ratio 0,89 : 1
Final Drive Ratio 4,13 : 1
Drive Wheels 4WD (4 Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball PAS
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front)
Suspension (rear)
Brakes (front/rear) VeDi/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)