1999 - Lamborghini - Diablo GT

Technical Specs of This Model
1. Diablo GT 1999
General Information
Make Lamborghini
Model Diablo GT
Production Year 1999
Country
Designer Marcello Gandini
Production Number 83
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2S FHC
Number of Doors 2
Wheelbase 2650 mm     (104,3 in)
Front Track 1650 mm     (65 in)
Rear Track 1670 mm     (65,7 in)
Length 4430 mm     (174,4 in)
Width 2040 mm     (80,3 in)
Height 1115 mm     (43,9 in)
Ground Clearance 110 mm     (4,3 in)
Length / Wheelbase Ratio 1,67
Weight 1530 kg     (3370 lb)
Weight Distribution (front/rear) %40 / %60
Fuel Capacity 100 litre   (22 Imp gal ,  26,4 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Lamborghini
Engine Location Middle
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement V-12
Valves per Cylinder 4    (Total of 48 Pieces)
Engine Displacement 5992 cc     (365,66 cu in)
Bore 87 mm     (3,43 in)
Stroke 84 mm     (3,31 in)
Bore / Stroke Ratio 1,04
Unitary Capacity 499,33 cc/cylinder    (30,47 cu in/cylinder)
Number of Main Bearings 7
Compression Ratio 10,7 : 1
Fuel System Type LIE fuel inj.
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 567 HP     (422,8 kW)
Maximum Engine Power rpm 7300 d/d
Maximum Engine Torque 630 N.m     (464,9 lb.ft ,  64,3 kg.m)
Maximum Engine Torque rpm 5500 d/d
Engine Torque at Max. Engine Power rpm 553,1 N.m    (7300 d/d)
Power / Weight Ratio 370,6 HP/ton    (276,3 W/kg)
Power / Engine Displacement Ratio 94,6 HP/litre    (70,6 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph 4,4 s
0 - 100 km/h
0 - 160 km/h 8,7 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 12,4 s    @ 198 km/h    (123 mph)
0 - 1000 m Acceleration 21,6 s    @ 246 km/h    (153 mph)
Top Speed 338 km/h   (210,1 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,68 : 1
Final Drive Ratio 4,66 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.DW.CS.ARB.
Suspension (rear) I.DW.CS.ARB.
Brakes (front/rear) VeDi/VeDi-S-ABS
Brake Disc Diameter (front) 355 mm
Brake Disc Diameter (rear) 335 mm
Wheels (front) 8.5J x 18
Wheels (rear) 13.0J x 18
Tyres (front) 245/35 ZR 18
Tyres (rear) 335/30 ZR 18