Homepage Technical Specifications of Cars Lincoln Continental Town Coupe

1975 - Lincoln - Continental Town Coupe

Technical Specs of This Model
1. Continental Town Coupe 1975
General Information
Make Lincoln
Model Continental Town Coupe
Production Year 1975
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S FHC
Number of Doors 2
Wheelbase 3231 mm     (127,2 in)
Front Track 1633 mm     (64,3 in)
Rear Track 1638 mm     (64,5 in)
Length 5913 mm     (232,8 in)
Width 2022 mm     (79,6 in)
Height 1407 mm     (55,4 in)
Ground Clearance
Length / Wheelbase Ratio 1,83
Weight 2359 kg     (5196 lb)
Weight Distribution (front/rear) %58 / %42
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Ford
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement V-8
Valves per Cylinder 2    (Total of 16 Pieces)
Engine Displacement 7539 cc     (460,06 cu in)
Bore 110,74 mm     (4,36 in)
Stroke 97,8 mm     (3,85 in)
Bore / Stroke Ratio 1,13
Unitary Capacity 942,38 cc/cylinder    (57,51 cu in/cylinder)
Number of Main Bearings
Compression Ratio 8 : 1
Fuel System Type 1 carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 206 HP     (153,6 kW)
Maximum Engine Power rpm 3800 d/d
Maximum Engine Torque 484 N.m     (357,2 lb.ft ,  49,4 kg.m)
Maximum Engine Torque rpm 2600 d/d
Engine Torque at Max. Engine Power rpm 386 N.m    (3800 d/d)
Power / Weight Ratio 87,3 HP/ton    (65,1 W/kg)
Power / Engine Displacement Ratio 27,3 HP/litre    (20,4 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 7,3 s
0 - 60 mph 9,5 s
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 17,12 s    @ 131 km/h    (81,3 mph)
0 - 1000 m Acceleration
Top Speed 200 km/h   (124,3 mph)
Gearbox and Transmission
Transmission Type 3A
Top Gear Ratio 1 : 1
Final Drive Ratio 3 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball PAS
Steering Turns (lock to lock) 3,5
Turning Circle Diameter
Suspension (front) I.U&LW.CS.
Suspension (rear) LA.CS.3Li.
Brakes (front/rear) VeDi/Di-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front) 6.5 x 15
Wheels (rear) 6.5 x 15
Tyres (front) 235R x 15
Tyres (rear) 235R x 15