Homepage Technical Specifications of Cars Mercedes-Benz 240 D Long Wheelbase

1975 - Mercedes-Benz - 240 D Long Wheelbase

Technical Specs of This Model
1. 240 D Long Wheelbase 1975
General Information
Make Mercedes-Benz
Model 240 D Long Wheelbase
Production Year 1975
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 3420 mm     (134,6 in)
Front Track 1480 mm     (58,3 in)
Rear Track 1430 mm     (56,3 in)
Length 5350 mm     (210,6 in)
Width 1786 mm     (70,3 in)
Height 1480 mm     (58,3 in)
Ground Clearance 165 mm     (6,5 in)
Length / Wheelbase Ratio 1,56
Weight 1565 kg     (3447,1 lb)
Weight Distribution (front/rear)
Fuel Capacity 65 litre   (14,3 Imp gal ,  17,2 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Mercedes-Benz
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 2404 cc     (146,7 cu in)
Bore 91 mm     (3,58 in)
Stroke 92,4 mm     (3,64 in)
Bore / Stroke Ratio 0,98
Unitary Capacity 601 cc/cylinder    (36,68 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 21 : 1
Fuel System Type Bo diesel pump
Aspiration Type Normal D.
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 64 HP     (47,7 kW)
Maximum Engine Power rpm 4200 d/d
Maximum Engine Torque 137 N.m     (101,1 lb.ft ,  14 kg.m)
Maximum Engine Torque rpm 2400 d/d
Engine Torque at Max. Engine Power rpm 108,5 N.m    (4200 d/d)
Power / Weight Ratio 40,9 HP/ton    (30,5 W/kg)
Power / Engine Displacement Ratio 26,6 HP/litre    (19,9 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 3,69 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball PAS
Steering Turns (lock to lock)
Turning Circle Diameter 13,3 m    (43,6 ft)
Suspension (front) I.W.CS.
Suspension (rear) I.STA.CS.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)