Homepage Technical Specifications of Cars Nissan Stanza 1600 LE Sedan

Nissan - Stanza 1600 LE Sedan

Technical Specs of This Model
1. Stanza 1600 LE Sedan
General Information
Make Nissan
Model Stanza 1600 LE Sedan
Production Year
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2470 mm     (97,2 in)
Front Track 1430 mm     (56,3 in)
Rear Track 1410 mm     (55,5 in)
Length 4300 mm     (169,3 in)
Width 1650 mm     (65 in)
Height 1405 mm     (55,3 in)
Ground Clearance 170 mm     (6,7 in)
Length / Wheelbase Ratio 1,74
Weight 880 kg     (1938,3 lb)
Weight Distribution (front/rear)
Fuel Capacity 54 litre   (11,9 Imp gal ,  14,3 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Nissan
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1598 cc     (97,52 cu in)
Bore 78 mm     (3,07 in)
Stroke 83,6 mm     (3,29 in)
Bore / Stroke Ratio 0,93
Unitary Capacity 399,5 cc/cylinder    (24,38 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 9 : 1
Fuel System Type 1 Ni carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 90 HP     (67,1 kW)
Maximum Engine Power rpm 5600 d/d
Maximum Engine Torque 133 N.m     (98,2 lb.ft ,  13,6 kg.m)
Maximum Engine Torque rpm 2800 d/d
Engine Torque at Max. Engine Power rpm 114,4 N.m    (5600 d/d)
Power / Weight Ratio 102,3 HP/ton    (76,3 W/kg)
Power / Engine Displacement Ratio 56,3 HP/litre    (42 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 155 km/h   (96,3 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 0,9 : 1
Final Drive Ratio 3,65 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion
Steering Turns (lock to lock) 3,6
Turning Circle Diameter 10,8 m    (35,4 ft)
Suspension (front) I.MS.LW.CS.
Suspension (rear) I.MS.RA.CS.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)